The new E>GO naviceiver generation sticks out
with a truly comprehensive feature set and State-of-the-Art
functionality. Therefore this web page is detailed and comprehensive, to
show you as much info about the this particular product line. We
suggest that you read this web content to acquaint yourself with the
ZE-NC5010, to learn about the seamless integration with your vehicle,
that this E>GO unit is capable of.
Navigation, entertainment, communication – the
ZE-NC5010 naviceiver is a complex navigation and multimedia system with a
large range of features. ZENEC‘s new top-of-the-line model fits
together visually with the Opel Astra, Corsa and Zafira.
The amber button illumination and the customized
design of the front panel makes the E>GO not only perfect for the
respective look of the car interior, but the E>GO is also
effortlessly integrated into the existing automotive electronics.
ZE-NC5010 can be installed into the original dash board without further
modifications and without any additional adapters: simply take out the
factory radio, put in the E>GO and drive off.
Even the connections of the factory-made steering
wheel remote control, driver information display and the bord
computer are no problem: simply connect the E>GO to the CAN-Bus of
the respective vehicle – the functionality of the factory installed
components is preserved.
Navigation, entertainment, communication – going
by the motto “Everything must be”, the ZE-NC5010 will convince you
through an abundance of equipment features. The built-in CD/DVD drive
plays all of the current A/V formats; the new RDS tuner guarantees
top-quality radio reception. The high-performance 4 x 50 watts digital
amplifier together with the integrated Dolby digital decoder provide for
impressive sound quality.
The 16.5 cm/6.5" touchscreen display is top quality:
A non reflecting TFT LCD panel with LED backlight delivers sharp,
brilliant and high-contrast pictures - under bright daylight conditions.
ZENEC uses the finest technology even with the
built-in Bluetooth system. The ZE-NC5010 is equipped with the CK5050+
Parrot BT module that makes comfortable hands-free and audio streaming
(A2DP, AVRCP) possible; the Bluetooth module features updateable
firmware.
The SD/SDHC card reader is easily accessible in the
front of the device and makes it possible to play music, movies or
display photos directly on the E>GO. The card slot is free for
multimedia use with SDHC cards up to 8 GB.
Playing music, videos, audio books, or podcasts from
the iPod or iPhone with the E>GO – no problem. Using the USB input
of the provided Media-Link-Box, both Apple devices are simply connected
and operated using the naviceiver’s touchscreen, including controlling
the video function.
Other signal sources and additional components such
as DVB-T tuners, rear view cameras, or head rest monitors can be
connected any time. Naturally all of the functions can be operated on
the high definition monitor via touchscreen, starting with the operation
of the DVD player, going on to the iPod and the integrated navigation,
and all the way to the additional components.
For many multimedia navigation systems, the
connection to the car’s pre-existing comfort functions is a big problem –
but not for the E>GO. Factory installed steering wheel remote
controls maintain their full range of functions with the ZE-NC5010. The
E>GO is simply connected to the steering wheel remote control by
interface via the vehicle-specific CAN-Bus. Every A/V source including
the hands-free function can then be controlled as usual using the
steering wheel remote control.
Opel vehicles are equipped with a board computer and
a car specific driver information display, depending on the model (TID,
BID, GID or CID) – these, too, are connected to the ZE-NC5010 by the
CAN-Bus. The text output functions such as station and track info from
the sources radio/CD/USB, etc. are supported by the corresponding driver
information display. Once the E>GO has been installed into the
vehicle, the board computer can be adjusted directly on the naviceiver’s
touchscreen.
Make phone calls and play music from your mobile
phone: ZENEC‘s naviceiver will establish interconnection with most
convenient operation of a Bluetooth compatible mobile phone from a
ZE-NC5010 control possible. You do not need any installation kits,
fixtures, cables, or even additional speakers in the vehicle‘s interior.
In addition to the hands-free application, audio
files from a mobile phone can be read-out (audio streaming via A2DP with
AVRCP-profile) and played back in superb quality through the car‘s
speakers and operated by touchscreen.
The new Parrot Bluetooth module marks an
improvement in mobile communication: advanced signal processing
technology, the so called Parrot Beamforming, is provided through a
multi-directional, freely positionable microphone which is easily
attached to the A-column. With this technology, all surrounding noises
and echo effects are eliminated so that the voice is clearer. In cases
where an externally mounted microphone is no option, an internal
microphone is provided as well.
Hands-Free during the drive – the caller number,
phone book entries and other information is clearly shown on the
ZE-NC5010 display. The address book of the naviceiver is automatically
synchronized with the mobile phone. The Parrot module enables an
alphanumeric sorting of phone book entries with an additional search
function – a feature that guarantees ease in finding phone book entries,
especially for professional use.
- redialing
- switch between hands-free and mobile phone to continue a call via mobile if necessary
- memory for dialed and received calls
- connection of up to 5 mobile phones, management and hosting of up to 1000 phone book entries
- search function using initials
The Bluetooth component firmware from ZE-NC5010
can be conveniently updated using a USB stick, for example if you would
like to use a new mobile phone model or business phone in the car. The
palette of compatible mobile telephones can be expanded at any time –
with the ZE-NC5010 you are always up-to-date.
Navigate unerringly via touchscreen in all of
western and eastern Europe – with its integrated navigation system, the
naviceiver ZE-NC5010 reliably shows you the way in more than 43
countries.
Enter the desired destination thereby choosing
between the various destination and route entries – through address,
ZIP/postal code, POI, saved/last found destinations. etc. – and you are
ready to go. Your electronic copilot guides you to your destination
without detours and shows you, if you so wish, relevant points such as
gas stations, hotels, restaurants, parking lots, etc.
Unmistakable navigation is ensured through a
clear graphic map display, where various scales and view modes are
available in 2-D and 3-D, as well as precise voice guidance (in 28
languages) and an easily understandable GUI display (also in 28
languages).
The automatic zoom at intersections or traffic
circles makes sure that there is no confusion even at difficult
locations. Tunnel mode and lane assistant plus the 3-D landscape or 3-D
city map views (with buildings, places of interest, and city maps)
simplify the navigation just as well as the highway split screen mode
with real signpost rendering (the display of signs in real-time on the
map).
A special feature deployed is the so called
split screen mode. Whatever source you are listening to, like radio or
music from other audio sources: with the touch of one finger you can
activate the split screen mode to see turn arrows and distance
information in the right pane of the main screen, to never miss an exit
or a crossing.
The ZE-NC5010 comes with a TMC and TMC Pro
(optional and only in Germany available) receiver. The TMC function
keeps you up to date regarding potential traffic jams on the chosen
route to destination, while automatic re-calculation of a suitable
detour is a function covered as well. Just select the respective TMC
function in the control menu and all relevant traffic control message
information will be shown on your map screen directly.
always up-to-date, allowing
you to compile interesting new features and all the content you wish to
run on your nav hardware, in no time.
Especially practical: USB-Port and 3.5 mm A/V-Port
are in the included, very compact Media-Link-Box. iPod and iPhone can be
connected to the Media link box with the adapter cable ZE-NC-IPS. The
connection using the USB high speed bus not only allows for quick access
to all files, but also the control of videos via the naviceiver
touch-screen. Naturally the iPod and iPhone are being charged during
playback.
This product was added to our catalog on Thursday 29 July, 2010.
